Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramKeyless.com to have the most current and accurate information. ProgramKeyless.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

2000 Oldsmobile Alero Key Fob Programming Instructions

2000 Alero

  1. Close the vehicle doors.
  2. Turn ignition to the ON position then OFF.
  3. Remove key from the ignition.
  4. Press and hold the driver side door lock switch in the UNLOCK position until step 8.
  5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder)
  6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder)
  7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder) Leave key in the ignition cylinder.
  8. Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated.
  9. Press the LOCK and UNLOCK buttons together on the keyless remote and hold unitl the vehicle beeps twice to verify that the keyless remote has been successfully programmed. This may take approximately 15 seconds.
  10. Perform the previous step (9) to program up to four keyless remotesm, including any old ones.
  11. Remove the ignition key to exit Program Mode.