Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramKeyless.com to have the most current and accurate information. ProgramKeyless.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

2003 BUICK Rendezvous Key Fob Programming Instructions

2003 Rendezvous

  1. Close all doors. Remove key from ignition.
  2. Press and hold the Unlock button on door lock switch on drivers door. Hold until instructed to release.
  3. Insert and remove key from ignition 2 times. Do Not turn ignition.
  4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
  5. Release door lock switch on drivers door panel. A Chime will sound 3 times indicating that you are in programming mode.
  6. Press both the Lock and Unlock buttons on the remote up to 30 seconds. A chime will sound 2 times if remote has programmed successful.
  7. Repeat step 6 if you are programming additional remotes.
  8. Remove key from ignition to exit programming mode.