2001 Isuzu Axiom Key Fob Programming Instructions
2001 Axiom
- Open the driver’s door.
- Insert key into ignition.
- Turn the ignition switch to the ACC position and then to the LOCK position three times. (This step must be completed within 3 seconds – go as fast as yo can, or the system will not enter the programming mode.)
- Within 10 seconds, close and open the door two times.
- Turn the ignition switch to the ACC position and then to the LOCK position three times (again, do this within 3 seconds.)
- Within 10 seconds, close and open the door. Verify that the power door locks cycle once to confirm that the system is in programming mode.
- Within 20 seconds, press the LOCK button on the transmitter you are programming. Verify that the door locks cycle once.
- Within 20 seconds, press the UNLOCK button on the transmitter. Verify that the door locks cycle once to confirm that the system has accepted the transmitter’s code.
- Repeat steps 7 and 8 for each transmitter to be added.
- Remove key from ignition.